Ionic Column Header
The Polure Ionic column header features classic dual-volute scrollwork that brings classical Greek elegance to architectural pillars and entrance facades. Manufactured from high-density rigid polyurethane (150-220 kg/m³), this decorative capital provides a hollow, non-load-bearing design meant to crown standard 20, 30, 40, 50, 60, or 80 cm diameter shafts. Important: Polure column elements are strictly non-load-bearing; structural weight must be supported by an internal steel profile, and concrete must never be poured inside the hollow core. Possessing water absorption under 1% and thermal stability from -100 °C / +80 °C with B2 fire safety class, it will not rot, swell, or warp. Factory pre-primed with white acrylic primer, installation requires continuous PU assembly adhesive on joining seams and countersunk screws.
Frequently Asked Questions
Can the Polure Ionic column header support structural weight?
No, Polure Ionic column headers are strictly decorative and non-load-bearing. Structural loads must be carried by an internal steel column.
Can concrete be poured inside the Polure Ionic column header?
No, pouring concrete inside Polure hollow columns or capitals is strictly forbidden as it will cause cracking and structural failure.
What material and fire class is the Ionic column header?
It is made of high-density rigid polyurethane (150-220 kg/m³) featuring a B2 flame-retardant fire safety rating.
How is the Ionic column header mounted to the column shaft?
Apply continuous PU assembly adhesive along all joining seams and secure with countersunk screws. Fill screw holes with acrylic filler before painting.