Imitation Wood Rafter End
Polure imitation wood rafter ends provide an elegant, maintenance-free solution for exposed roof eaves, gables, and ceiling rafter detailing. Precision-molded from real timber masters, these high-density rigid polyurethane (150-220 kg/m³) rafter tails mimic authentic grain and carved profiles without imposing heavy structural loads on roof overhangs. Engineered with a closed-cell matrix, water absorption is strictly under 1%, guaranteeing that the elements will never rot, warp, split, or attract carpenter bees and woodworms. Fire class B2 compliant and resistant to thermal swings from -100 °C / +80 °C, each piece arrives pre-coated with a technical white acrylic primer. Installation is completed using a continuous bead of polyurethane assembly adhesive on mounting surfaces and joining seams, reinforced with countersunk screws. Fill fixing holes with exterior acrylic filler and sand lightly prior to finishing with elastic UV-resistant topcoat paint.
Frequently Asked Questions
What is an imitation wood rafter end used for?
It decorates exposed roof eaves, gables, or interior ceilings, recreating carved timber rafter tails.
Will Polure imitation wood rafter ends rot or attract insects outdoors?
No, with water absorption below 1% and non-organic PU material, they will never rot, warp, or attract wood-boring insects.
How are imitation wood rafter ends secured under roof eaves?
Secure with a dual system: continuous polyurethane assembly adhesive on contact edges and mechanical countersunk screws.
What paint finish is required for outdoor rafter ends?
After light sanding (180-220 grit) over the factory primer, apply elastic, UV-resistant exterior paint to prevent UV fading.