Helix Design Pillar
Polure helix design pillars bring artistic twisted geometry and classical grandeur to interior lobbies, porticos, and exterior facade architecture. Molded from high-density rigid polyurethane (150-220 kg/m³), these helical pillars deliver wood-like mechanical durability while avoiding unnecessary dead load on flooring. Their closed-cell structural composition maintains water absorption below 1%, protecting the pillars from rot, swelling, warping, or mold growth even when exposed to outdoor moisture. Fire-rated B2 and resilient across temperatures from -100 °C / +80 °C, they arrive pre-coated with a white acrylic technical primer. Installation requires dual fastening using polyurethane assembly adhesive along contact edges paired with countersunk mechanical screws.
Frequently Asked Questions
What characterizes a Polure helix design pillar?
A helix design pillar features a spiraled or twisted shaft pattern that creates dynamic architectural shadows and opulent classical depth.
Are helix design pillars load-bearing?
No, Polure helix design pillars are hollow decorative elements and strictly non-load-bearing. Load support must be provided by an internal structural pillar.
What density material is used for helix design pillars?
They are molded from high-density rigid polyurethane (150-220 kg/m³), providing wood-like physical strength and impact resistance.
How are helix design pillars attached?
Apply continuous lines of PU assembly adhesive on joining edges and wall contact surfaces, then fix with countersunk mechanical screws. Fill screw holes and sand prior to painting.
Can silicone adhesive be used to bond helix design pillars?
No, silicone adhesive is strictly forbidden because it lacks structural bonding capability. Only polyurethane assembly adhesive paired with mechanical screws must be used.