Half Column Decor
Polure half column decors provide monumental architectural framing and classical aesthetic appeal along flat wall surfaces and entrance ways. Molded from high-density rigid polyurethane (150-220 kg/m³), these semi-circular decorative elements offer exceptional impact resistance while remaining non-load-bearing and hollow inside. Standard diameters range from 20 to 80 cm with a standard height of 240 cm. Featuring closed-cell construction with water absorption under 1%, they resist humidity, swelling, and fungal decay in both interior halls and exterior facades. Pre-primed at the factory with a white acrylic primer, they accept water-based or exterior paints. Mounting requires continuous polyurethane assembly adhesive on wall contact edges, secured with mechanical countersunk screws.
Frequently Asked Questions
Are Polure half column decors structural or load-bearing?
No, they are strictly decorative and non-load-bearing with a hollow interior; internal steel profiles must be used for structural support.
Can concrete be poured inside Polure half column decors?
No, pouring concrete inside polyurethane columns or half columns is strictly forbidden as expansion will crack the material.
What material density is used for half column decors?
They are molded from high-density rigid polyurethane (150-220 kg/m³), providing wood-like strength.
How are half column decors installed on wall surfaces?
Apply continuous PU assembly adhesive along wall contact edges, fix with countersunk screws, fill joints, sand, and paint.