Facade Pillar Capital
Polure facade pillar capitals crown outdoor porch columns, entryway pilasters, and exterior colonnades with majestic classical grandeur. Manufactured from high-density rigid polyurethane (150-220 kg/m³), these hollow decorative capitals reproduce crisp Doric, Ionic, or Corinthian architectural motifs with wood-like mechanical durability and hail-proof impact strength. Engineered with a closed-cell polymer matrix and water absorption under 1%, they will never absorb rainwater, swell, rot, or freeze-crack during severe weather. Thermally stable across extreme temperatures from -100 °C / +80 °C and rated B2 for fire safety, they arrive pre-coated with factory white acrylic technical primer. Important: Polure facade pillar capitals are decorative and NON-LOAD-BEARING; structural roof or arch loads must be carried by an internal steel post. Never pour concrete inside the hollow core. Install using continuous PU assembly adhesive along contact faces and joining edges, secured with mechanical countersunk screws. Fill screw holes and joints with facade putty, sand smooth (180-220 grit), and paint with UV-resistant exterior facade paint.
Frequently Asked Questions
Can a Polure facade pillar capital support structural roof loads?
No, Polure facade pillar capitals are decorative and NON-LOAD-BEARING. All structural loads must be supported by an internal steel profile; never pour concrete inside.
What material is used to manufacture facade pillar capitals?
They are crafted from high-density rigid polyurethane (150-220 kg/m³), providing hail resistance, B2 fire safety, and crisp architectural relief.
Will a facade pillar capital withstand freezing rain and hail?
Yes, with water absorption below 1% and thermal stability from -100 °C / +80 °C, it will not absorb water, rot, swell, or crack outdoors.
How is a facade pillar capital installed?
It is installed using continuous PU assembly adhesive on joining seams and contact faces combined with mechanical countersunk screws, then filled with facade putty.