Exterior Decorative Panel
Polure exterior decorative wall panels bring high-end architectural relief and weatherproof wall cladding aesthetics to residential villas, commercial facades, and entrance portals. Molded from high-density rigid polyurethane (150-220 kg/m³), these exterior wall panels offer stone- and timber-like structural impact resistance without heavy foundation loads. Featuring a closed-cell polymer structure with water absorption under 1%, they provide total resistance against rain, frost, rot, and UV weathering. Operating reliably from -100 °C / +80 °C and rated B2 for fire safety, every panel carries a factory-applied white acrylic technical primer. Installation requires applying continuous polyurethane assembly adhesive to rear contact surfaces and anchoring with mechanical screws into the facade substrate. Screw heads are filled with exterior putty, sanded smooth, and topcoated with UV facade paint.
Frequently Asked Questions
What density material is used for Polure exterior decorative panels?
They are molded from high-density rigid polyurethane (150-220 kg/m³), delivering high impact strength and lightweight handling.
Do Polure exterior decorative panels withstand frost and winter conditions?
Yes. With water absorption under 1%, they endure temperatures from -100 °C / +80 °C without cracking, rotting, or warping.
How are exterior decorative panels mounted to building facades?
Apply continuous polyurethane assembly adhesive on rear faces and anchor with mechanical countersunk screws into wall substrates. Fill screw holes, sand, and paint. Silicone is forbidden.
Is silicone adhesive permitted for exterior decorative panel installation?
No, silicone is strictly forbidden because it lacks structural bonding strength. Only polyurethane assembly adhesive paired with screws must be used.
What paint finish is required for exterior decorative panels?
Panels come factory-primed with white acrylic primer and must be topcoated with an elastic, UV-resistant exterior facade paint.