Embossed Wainscoting Moulding
Polure embossed wainscoting moulding introduces rich dimensional textures and historical relief to lower wall paneling systems. Manufactured from high-density rigid polyurethane (150-220 kg/m³), this tactile trim provides wood-like impact resistance without structural heaviness. Its closed-cell composition retains water absorption under 1%, preventing swelling, rot, or mold degradation even in high-humidity hallways, dining rooms, or bathrooms. Engineered to withstand climate variation between -100 °C / +80 °C, it carries a B2 flame-retardant rating and comes pre-coated with a factory acrylic white primer. Installation is executed using continuous PU assembly adhesive on contact edges and mechanical countersunk screws, followed by acrylic filling, fine sanding, and paint application.
Frequently Asked Questions
What material is Polure embossed wainscoting moulding crafted from?
It is crafted from high-density rigid polyurethane (150-220 kg/m³), offering strong impact resistance, B2 fire rating, and detailed embossed patterns.
Can embossed wainscoting moulding withstand damp environments?
Yes. With water absorption below 1%, its closed-cell structure completely resists moisture, preventing warping and mold growth.
How is embossed wainscoting moulding installed on walls?
Apply continuous PU assembly adhesive on back surfaces and secure with countersunk screws. Fill seams with acrylic putty, sand with 180-220 grit, and paint.
Can silicone be used to bond embossed wainscoting moulding?
No, silicone adhesive is forbidden due to insufficient holding power. Polyurethane assembly adhesive combined with screws is required.