Decorative Wall Pillar
Polure decorative wall pillars create classical vertical relief and architectural structure on interior and exterior wall surfaces. Produced from high-density rigid polyurethane (150-220 kg/m³), these pilaster elements replicate authentic stone and woodwork without structural weight penalties. The closed-cell material retains water absorption below 1%, protecting walls from mold, dampness, and rot even in high-moisture zones or outdoor facades. Rated B2 for fire resistance and stable from -100 °C / +80 °C, each wall pillar is pre-coated with technical white acrylic primer. Installation is completed with polyurethane assembly adhesive on wall contact surfaces and countersunk screws.
Frequently Asked Questions
What density material is used for the decorative wall pillar?
The decorative wall pillar is produced from high-density rigid polyurethane (150-220 kg/m³) for maximum durability.
Can the decorative wall pillar be installed outdoors on building facades?
Yes, with water absorption under 1% and tolerance from -100 °C / +80 °C, it is ideal for outdoor facade pilasters.
What adhesive is required to attach the decorative wall pillar?
Continuous polyurethane assembly adhesive is required along contact edges. Silicone is forbidden as it cannot provide adequate bond strength.
Is the decorative wall pillar a load-bearing column?
No, Polure decorative wall pillars are non-load-bearing wall architectural elements.