Polyurethane Pedestal Stand
The Polure polyurethane pedestal stand presents a timeless sculptural base designed to display statues, urns, and decorative artifacts. Manufactured from high-density rigid polyurethane (150-220 kg/m³), this display pedestal provides timber-like impact resistance and structural strength while remaining lightweight for easy interior or exterior placement. Featuring closed-cell composition with less than 1% water absorption, it will not warp, swell, rot, or foster mold in humid interiors or outdoor courtyard environments. Operating within temperature ranges of -100 °C / +80 °C and rated B2 for fire safety, every pedestal comes factory-primed with a white acrylic technical primer. Installation or placement requires clean surface positioning, continuous polyurethane assembly adhesive on contact edges if wall-attached, and countersunk mechanical screws. Fill joints and screw heads with acrylic putty, sand with 180-220 grit, and finish with topcoat paint.
Frequently Asked Questions
What material is used in the Polure polyurethane pedestal stand?
The Polure polyurethane pedestal stand is manufactured from high-density rigid polyurethane (150-220 kg/m³) with a B2 fire safety rating.
Can a polyurethane pedestal stand be used in outdoor gardens?
Yes, with water absorption below 1% and thermal resilience from -100 °C / +80 °C, it is fully weatherproof for outdoor placement.
How is a polyurethane pedestal stand anchored securely?
It can be freestanding or anchored using continuous polyurethane assembly adhesive and mechanical screws. Silicone is forbidden.
Is the polyurethane pedestal stand capable of supporting heavy sculptures?
Yes, high-density polyurethane (150-220 kg/m³) provides robust mechanical load-bearing capacity for decorative sculptures and planters.