Decorative Rose Swag
Polure decorative rose swags feature botanical drapery garlands, carved rosebud clusters, and flowing ribbon ties for mantle friezes, overdoor architraves, and wall panel centers. Molded from high-density rigid polyurethane (150-220 kg/m³), these rose garland appliques match wood in density and structural strength while capturing fine petal contours without fragility. Incorporating a closed-cell physical structure with water absorption under 1%, they will not warp, swell, rot, or cultivate mold in humid indoor atmospheres. Certified B2 fire class, they remain stable across temperatures from -100 °C / +80 °C. Factory-coated in a white acrylic primer, each piece accepts topcoat paints seamlessly. Installation requires a continuous bead of polyurethane assembly adhesive combined with mechanical screw fasteners.
Frequently Asked Questions
What material is the Polure decorative rose swag manufactured from?
Polure decorative rose swags are manufactured from high-density rigid polyurethane (150-220 kg/m³), ensuring B2 fire class safety and wood-like impact strength.
Can decorative rose swags be installed over fireplaces?
Yes, on electric or vapor fireplaces generating surface temperatures under 80°C. Open flames are forbidden.
What adhesive is required to install a decorative rose swag?
Continuous polyurethane assembly adhesive must be applied along rear contact faces with mechanical screw fixings. Silicone adhesive is forbidden.
How should decorative rose swags be prepared prior to painting?
Lightly sand the factory white acrylic primer with 180-220 grit sandpaper to remove residue, then apply two coats of paint.