Corinthian Bases
Polure Corinthian bases feature multi-tiered architectural molding sequences designed specifically to anchor Corinthian decorative columns and pilasters. Molded from high-density rigid polyurethane (150-220 kg/m³), these hollow bases provide wood-like mechanical strength and impact durability while eliminating structural load stress on floors. Featuring a closed-cell polymer structure with water absorption under 1%, they offer complete moisture resistance and mold protection in grand entrances, living halls, or exterior porticos. Operating reliably across temperatures from -100 °C / +80 °C with Class B2 fire safety certification, each base comes factory pre-coated with white acrylic primer. Note that Polure Corinthian bases are strictly decorative non-load-bearing components; structural column loads must be supported by an internal steel profile. Never pour concrete inside. Installation requires applying continuous polyurethane assembly adhesive on contact joints (silicone is strictly forbidden) and securing with countersunk mechanical screws. Fill screw holes with putty, sand smooth with 180-220 grit paper, and apply two coats of paint.
Frequently Asked Questions
Are Polure Corinthian Bases load-bearing?
No, Polure Corinthian Bases are strictly decorative and NON-LOAD-BEARING. Structural loads must be supported by an internal steel profile.
Can concrete be poured inside Corinthian Bases?
NEVER pour concrete inside Corinthian Bases as it will damage and distort the polyurethane shell.
What density material is used in Polure Corinthian Bases?
Polure Corinthian Bases are molded from high-density rigid polyurethane (150-220 kg/m³), offering wood-like strength.
What adhesive should be used for installing Corinthian Bases?
Always use polyurethane assembly adhesive combined with mechanical screws. Silicone is strictly forbidden.