Wall Bracket Accent
Polure wall bracket accents bring subtle architectural interest and elegant ornamental framing to interior walls, archways, and window surrounds. Crafted from rigid high-density polyurethane (150-220 kg/m³), these lightweight accent corbels provide the impact-resistant mechanical strength of solid timber without burdening wall surfaces. The closed-cell polymer structure holds water absorption below 1%, ensuring immunity to rotting, swelling, or mold growth in humid bathrooms or covered exterior porches. Thermally stable between -100 °C / +80 °C and rated Class B2 fire-retardant, the accent corbel preserves its refined details over time. Factory pre-primed with a smooth white acrylic coating, it is ready for any custom paint finish. Installation requires cleaning mounting surfaces, applying continuous beads of polyurethane assembly adhesive on rear rims, fixing with mechanical countersunk screws, filling screw holes with acrylic putty, sanding smooth with 180-220 grit paper, and painting with two coats.
Frequently Asked Questions
What density material is used in Polure wall bracket accents?
Polure wall bracket accents are molded from high-density rigid polyurethane (150-220 kg/m³), ensuring strong structural durability.
Can wall bracket accents be installed in humid locations?
Yes, with water absorption below 1%, closed-cell polyurethane will not rot, warp, or mold in humid conditions.
How is a wall bracket accent properly installed?
Clean the surface, apply continuous polyurethane assembly adhesive, fix with mechanical screws, fill countersunk holes with acrylic putty, sand with 180-220 grit, and topcoat.
Why is silicone glue forbidden when fitting a wall bracket accent?
Silicone adhesive lacks structural bonding power. Always use dedicated polyurethane assembly adhesive along with mechanical screws.
What paint system should be used on a wall bracket accent?
Lightly sand the factory white acrylic primer with 180-220 grit paper, then apply two coats of water-based or synthetic paint.