Corinthian Pillar Capital
The Polure Corinthian pillar capital brings ornate classical sculpture and timeless acanthus leaf motifs to interior and exterior architectural columns. Crafted from high-density rigid polyurethane (150-220 kg/m³), this crown capital combines fine hand-carved appearance with exceptional impact resistance. Its closed-cell composition ensures water absorption below 1%, eliminating concerns of rotting, warping, or mold growth in humid environments or outdoor weather. Built to endure temperatures from -100 °C / +80 °C with B2 fire resistance, it arrives factory-coated in a white acrylic technical primer. Securing the capital requires continuous polyurethane assembly adhesive on contact joints and mechanical screw anchoring. Fill countersunk screw heads and joints with facade filler, sand smooth using 180-220 grit paper, and finish with suitable topcoat paint.
Frequently Asked Questions
What material is the Polure Corinthian pillar capital made of?
It is made of high-density rigid polyurethane (150-220 kg/m³), providing wood-like durability and B2 fire rating.
Can the Corinthian pillar capital be installed outdoors?
Yes, with water absorption below 1% and tolerance between -100 °C / +80 °C, it withstands severe outdoor weather.
How is the Corinthian pillar capital attached during installation?
It requires continuous polyurethane assembly adhesive paired with countersunk screws. Silicone is forbidden.
Does the Corinthian pillar capital support heavy structural loads?
No, Corinthian pillar capitals are decorative and non-load-bearing. Load-bearing pillars require internal steel columns.