Corinthian Capital Stand
The Corinthian capital stand by Polure crowns architectural columns and decorative pedestals with intricate acanthus leaf carving and classical Greek grandeur. Manufactured from high-density rigid polyurethane (150-220 kg/m³), this hollow decorative capital delivers crisp relief details and wood-like mechanical toughness without adding excessive weight to column shafts or floor surfaces. Remember that Polure polyurethane capitals are purely decorative and NON-LOAD-BEARING; structural support requires an internal steel profile, and concrete must NEVER be poured inside the hollow body. Featuring a closed-cell composition with less than 1% moisture absorption, it will not rot, swell, or mold indoors or outdoors. Certified Class B2 for flame retardancy, it withstands thermal conditions from -100 °C / +80 °C. Supplied with a technical white acrylic primer, outdoor use requires topcoating with elastic UV-resistant paint. Fasten using PU adhesive and countersunk screws.
Frequently Asked Questions
Is the Polure Corinthian capital stand load-bearing?
No, Polure polyurethane capitals are hollow, decorative, and strictly non-load-bearing. Structural loads require an internal steel profile, and concrete must never be poured inside.
What density rating does the Corinthian capital stand possess?
It features a high-density rigid polyurethane rating of 150-220 kg/m³ (production target ~160 kg/m³), providing wood-like impact strength and Class B2 fire safety.
Can the Corinthian capital stand be used on outdoor column assemblies?
Yes, with water absorption below 1%, it resists weather. For outdoor use, it must be topcoated with an elastic UV-resistant exterior paint.
How is the Corinthian capital stand properly attached?
Attach using a continuous bead of PU assembly adhesive on joining surfaces along with mechanical countersunk screws. Silicone is strictly forbidden.