Column Head Decor
Polure column head decor adds architectural elegance and classic detail to structural or decorative pillars on interior walls and exterior facades. Manufactured from high-density rigid polyurethane (150-220 kg/m³), this crown ornament provides wood-like impact resistance while remaining lightweight to eliminate heavy structural loads. Featuring a closed-cell composition with less than 1% water absorption, it will not rot, warp, swell, or cultivate mold when exposed to high moisture or outdoor weather conditions. Formulated to endure temperatures from -100 °C / +80 °C with a B2 fire safety classification, each piece comes factory-coated in a white acrylic technical primer. Installation requires fine-tooth saw trimming, continuous polyurethane assembly adhesive applied along wall contact edges, and countersunk mechanical screws. Fill screw holes with acrylic putty, sand with 180-220 grit, and finish with quality topcoat paint.
Frequently Asked Questions
What material is used in Polure column head decor?
Polure column head decor is produced from high-density rigid polyurethane (150-220 kg/m³), ensuring impact resistance and a B2 fire rating.
Is column head decor suitable for outdoor facade installation?
Yes, with water absorption below 1% and stability between -100 °C / +80 °C, it resists severe weather, moisture, and temperature fluctuations.
How should column head decor be attached to columns?
It must be installed using continuous polyurethane assembly adhesive combined with countersunk screws. Silicone is forbidden.
Are Polure column head decor elements load-bearing?
No, column head decor elements are decorative and non-load-bearing; structural loads require an internal steel support column.