Decorative Pilaster Capital
Polure decorative pilaster capitals crown interior wall posts and exterior building pilasters with intricate classical scrollwork and acanthus leaf sculpting. Molded from rigid high-density polyurethane (150-220 kg/m³), these ornate capitals deliver wood-like structural integrity while remaining lightweight and easy to mount. Closed-cell polymer engineering limits water absorption below 1%, ensuring the capitals will not swell, rot, warp, or foster mold in indoor or outdoor applications (-100 °C / +80 °C). Each capital arrives factory-primed with white acrylic primer. Installation involves applying continuous polyurethane assembly adhesive on back contact edges and wall joinery, secured with countersunk mechanical screws. Fill screw recesses with acrylic putty, sand smooth with 180-220 grit sandpaper, and coat with two coats of paint.
Frequently Asked Questions
What density material is used in Polure decorative pilaster capitals?
Polure decorative pilaster capitals are molded from rigid high-density polyurethane (150-220 kg/m³).
Can decorative pilaster capitals be installed on outdoor facades?
Yes, with water absorption below 1% and a temperature range of -100 °C / +80 °C, they excel on exterior facades.
What adhesive is required for mounting decorative pilaster capitals?
Continuous polyurethane assembly adhesive must be applied along all wall contact and joining edges. Silicone is forbidden.
Are mechanical screws necessary when installing decorative pilaster capitals?
Yes, dual attachment combining polyurethane adhesive with countersunk screws guarantees permanent installation.
How should decorative pilaster capitals be painted after mounting?
Lightly sand with 180-220 grit sandpaper, fill joint seams with acrylic putty, and apply two coats of paint.