Classical Wall Panel
The Polure classical wall panel brings timeless wainscoting sophistication and recessed architectural framing to luxury interiors and grand corridors. Crafted from high-density rigid polyurethane (150-220 kg/m³), this decorative panel delivers wood-like mechanical impact strength while remaining lightweight to prevent wall overload. Its closed-cell composition ensures water absorption remains below 1%, preventing warping, rotting, or mold formation even in high-humidity areas like dining halls, spas, or bathrooms. Formulated to perform in temperatures from -100 °C / +80 °C with B2 fire safety rating, each panel is factory-coated with a white acrylic technical primer. Installation requires precise miter saw cuts, continuous polyurethane assembly adhesive on rear surfaces, and countersunk screws. Fill joints and screw heads with acrylic filler, sand with 180-220 grit, and finish with water-based or synthetic topcoat paint.
Frequently Asked Questions
What material is used in the Polure classical wall panel?
The Polure classical wall panel is manufactured from high-density rigid polyurethane (150-220 kg/m³), providing timber-like strength and B2 fire rating.
Can classical wall panels be installed in humid spaces like bathrooms?
Yes, with water absorption below 1%, they will not warp, rot, swell, or cultivate mold in wet or humid conditions.
How are classical wall panels mounted securely?
They must be mounted using continuous polyurethane assembly adhesive paired with countersunk mechanical screws. Silicone is forbidden.
How should classical wall panels be painted?
Lightly sand the factory primer with 180-220 grit paper, then apply two coats of water-based, synthetic, or cellulosic paint.