Classical Wall Motifs
Polure classical wall motifs bring timeless architectural symmetry to interior feature walls, wainscoting frames, and grand ceiling spaces. Molded from rigid high-density polyurethane (150-220 kg/m³), these relief ornaments combine fine sculptural detail with structural stability and wood-like toughness. Their closed-cell structure keeps water absorption under 1%, preventing warping, swelling, and mold growth in both residential and commercial spaces. Pre-treated with factory white acrylic primer, they are completely ready for final painting. Mounting requires applying a continuous line of polyurethane assembly adhesive on back contact edges, complemented by countersunk mechanical screws. After installation, fill screw recesses and joints with facade acrylic putty, sand smooth using 180-220 grit sandpaper, and apply two coats of water-based or synthetic paint.
Frequently Asked Questions
What density material is used in Polure classical wall motifs?
Polure classical wall motifs are manufactured from rigid high-density polyurethane (150-220 kg/m³).
Can classical wall motifs be installed in humid indoor spaces?
Yes, with water absorption below 1%, these polyurethane motifs do not swell or develop mold in humid environments.
What adhesive should be used for installing classical wall motifs?
Use continuous polyurethane assembly adhesive along all rear contact edges. Silicone adhesives are forbidden.
Is mechanical screw fixing required for classical wall motifs?
Yes, proper installation requires combining polyurethane adhesive with countersunk screws that are puttied and sanded.
How should classical wall motifs be painted after mounting?
Lightly sand with 180-220 grit sandpaper and apply two coats of water-based or synthetic paint.