Classical Pillar Decor
Polure classical pillar decor adds refined symmetry and historic dignity to entryway pillars, verandas, and interior halls. Constructed from high-density rigid polyurethane (150-220 kg/m³), this pillar trim yields wood-like mechanical durability while being light enough to prevent wall overload. Its closed-cell material composition restricts water absorption to under 1%, ensuring complete immunity to rot, mold, swelling, and pests. Capable of standing temperature ranges from -100 °C / +80 °C, it holds a B2 fire safety rating for self-extinguishing protection. Factory pre-primed in white acrylic technical primer, installation requires applying continuous PU assembly adhesive along rear edges reinforced with mechanical countersunk screws. Fill screw recesses and joint lines with acrylic putty, sand with 180-220 grit paper, and apply topcoat paint.
Frequently Asked Questions
What material is Polure classical pillar decor made from?
It is molded from high-density rigid polyurethane (150-220 kg/m³), providing wood-like impact strength and lightweight handling.
How is Polure classical pillar decor installed?
Mount using continuous polyurethane assembly adhesive on joint faces and countersunk screws. Silicone adhesive is prohibited. Fill joints, sand with 180-220 grit, and finish with paint.
Is Polure classical pillar decor weather resistant?
Yes. With water absorption below 1% and thermal tolerance from -100 °C / +80 °C, it withstands rain, frost, and sun without warping.
What painting steps should be followed for classical pillar decor?
Factory white acrylic technical primer is pre-applied. Sand lightly with 180-220 grit sandpaper and apply topcoat paint.
Is Polure classical pillar decor load-bearing?
No, it is non-load-bearing decorative trim. Internal steel columns must carry structural building loads.