Classical Pillar Base
Polure classical pillar bases provide structural visual grounding and classical plinth anchoring for architectural columns, porch supports, and wall pilasters. Formed from high-density rigid polyurethane (150-220 kg/m³), these bases deliver exceptional mechanical impact resistance against lower wall kicks, vacuum cleaners, and outdoor lawn care equipment. Featuring a closed-cell matrix with water absorption under 1%, they will not absorb groundwater, rot, or swell when installed near floor levels or ground lines. Certified fire class B2 and thermally stable from -100 °C / +80 °C, each base arrives factory pre-primed with white acrylic primer. Installation is completed by applying continuous polyurethane assembly adhesive to bottom and rear contact faces, securing with mechanical screws, filling fastener heads with facade filler, sanding smooth with 180-220 grit, and painting with topcoat paint.
Frequently Asked Questions
What material is used for Polure classical pillar bases?
Polure classical pillar bases are manufactured from high-density rigid polyurethane (150-220 kg/m³), offering high impact strength and B2 fire rating.
Are classical pillar bases load-bearing?
No, Polure classical pillar bases are decorative non-load-bearing elements. Structural loads must be carried by an internal steel core profile.
How do you install classical pillar bases?
Apply continuous PU assembly adhesive on contact edges, secure with mechanical screws, fill screw holes with filler, sand, and paint.
Is silicone allowed for gluing classical pillar bases?
No, silicone is strictly forbidden as it lacks long-term structural bonding. Always use polyurethane assembly adhesive together with mechanical screws.