Classical Column Cladding
Polure classical column cladding provides authentic Roman and Greek proportioned shells designed to enclose raw structural supports, steel pillars, or concrete posts. Molded from high-density rigid polyurethane (150-220 kg/m³), these two-piece hollow cladding shells offer wood-equivalent mechanical strength and high impact durability, transforming plain structural posts into ornate architectural columns. Their closed-cell structural body retains water absorption strictly under 1%, preventing rot, swelling, or mold growth in interior corridors or covered exterior patios. Rated B2 for fire safety, 0 VOC emissions, and stable from -100 °C / +80 °C, each cladding section comes factory pre-primed with white acrylic technical primer. Important: Polure classical column cladding is non-load-bearing and must enclose a structural post for load support. Installation requires polyurethane assembly adhesive and countersunk screws.
Frequently Asked Questions
What is Polure classical column cladding used for?
Classical column cladding is a two-piece hollow decorative shell used to transform raw structural posts or steel pillars into classical architectural columns.
Is Polure classical column cladding load-bearing?
No, Polure classical column cladding is strictly non-load-bearing decorative shell cladding.
What material density is used for classical column cladding?
They are molded from high-density rigid polyurethane (150-220 kg/m³), providing wood-like physical durability and sharp relief detailing.
Can concrete be poured inside classical column cladding?
No, pouring concrete inside polyurethane column cladding is strictly forbidden because thermal expansion will crack the shell.
Can silicone adhesive be used to assemble classical column cladding?
No, silicone adhesive is strictly forbidden because it lacks structural bonding capability. Only polyurethane assembly adhesive paired with mechanical screws must be used.