Classical Column Body
Polure classical column body shafts deliver iconic architectural proportions and structural aesthetic value for grand entrance halls, porticos, and exterior facade pilasters. Molded from high-density rigid polyurethane (150-220 kg/m³), these hollow column shafts offer solid wood-like impact toughness while remaining lightweight for straightforward handling. Featuring a closed-cell structural composition with water absorption below 1%, they will never swell, rot, or harbor mold growth in high-humidity areas or outdoor climates. Designed for thermal performance between -100 °C / +80 °C with B2 fire safety class, each column body arrives factory pre-primed in a white acrylic coating. Installation requires continuous polyurethane assembly adhesive combined with mechanical countersunk screws. Lightly sand (180-220 grit) prior to topcoat painting.
Frequently Asked Questions
What material is used for Polure classical column body shafts?
They are molded from high-density rigid polyurethane (150-220 kg/m³), offering wood-like impact toughness, light weight, and a B2 fire safety rating.
Are classical column body shafts structural load-bearing components?
No, Polure column bodies are decorative non-load-bearing elements. Structural loads must be carried by an internal steel column. Concrete pouring inside is forbidden.
Can classical column body shafts be installed outdoors?
Yes, with water absorption below 1% and thermal stability from -100 °C / +80 °C, they perform reliably outdoors when painted.
How is a classical column body shaft installed?
Apply continuous polyurethane assembly adhesive along contact surfaces and join with mechanical countersunk screws. Silicone is forbidden.