Classical Architectural Moulding
Polure classical architectural moulding brings traditional proportions, crisp shadow lines, and ornate profiles to ceiling transitions, door frames, and wall paneling. Manufactured from high-density rigid polyurethane (150-220 kg/m³), these mouldings provide high impact resistance and wood-like durability while remaining lightweight and flexible for easy alignment. The closed-cell physical material features under 1% water absorption, preventing moisture damage, rot, or mold growth. Rated B2 fire class, they perform reliably across temperatures from -100 °C / +80 °C. Pre-coated at the factory with a white acrylic primer, they are ready for topcoat painting. Installation requires continuous polyurethane assembly adhesive on wall contact faces and joint cut edges, reinforced with mechanical screw fixings.
Frequently Asked Questions
What material is Polure classical architectural moulding manufactured from?
Polure classical architectural moulding is made from high-density rigid polyurethane (150-220 kg/m³), ensuring B2 fire rating and high impact strength.
Can classical architectural moulding be installed in damp rooms?
Yes. Water absorption is under 1%, preventing warping, swelling, or mold in humid indoor areas.
What adhesive is required to install classical architectural moulding?
Continuous polyurethane assembly adhesive must be applied along back contact surfaces and 45° miter joints with screws. Silicone is strictly forbidden.
How do you prepare classical architectural moulding before painting?
Lightly sand the factory white acrylic primer with 180-220 grit sandpaper, then apply two coats of water-based or synthetic paint.