Classical Acanthus Carving
Polure classical acanthus carvings embody historic Greco-Roman architectural detail, sweeping leaf relief, and sculptural elegance for wall panels, pediments, ceiling medallions, and fine furniture. Molded from high-density rigid polyurethane (150-220 kg/m³), these acanthus leaf motifs capture the delicate depth of hand-carved wood while delivering impact-resistant structural strength. The non-porous closed-cell material maintains water absorption under 1%, preventing moisture absorption, rot, or mold growth in humid indoor areas. Certified B2 fire class, they perform dependably across temperatures from -100 °C / +80 °C. Pre-coated in a factory white acrylic primer, each carving is ready for topcoat painting. Installation requires a continuous bead of polyurethane assembly adhesive combined with mechanical screw fixings.
Frequently Asked Questions
What material is the Polure classical acanthus carving made from?
Polure classical acanthus carvings are manufactured from high-density rigid polyurethane (150-220 kg/m³), providing wood-like durability and B2 fire class rating.
Can classical acanthus carvings be installed in humid rooms like bathrooms?
Yes. With water absorption under 1%, polyurethane acanthus appliques will not swell, warp, or harbor mold in moist conditions.
What adhesive should be used for installing a classical acanthus carving?
Continuous polyurethane assembly adhesive must be applied along rear contact faces with mechanical screw fasteners. Silicone adhesive is forbidden.
How do you prepare a classical acanthus carving before painting?
Lightly sand the factory white acrylic primer with 180-220 grit sandpaper, then apply two coats of water-based or synthetic paint.