Classic Fireplace Mantel
Polure Classic Fireplace Mantel serves as an architecturally commanding mantelpiece center for traditional and contemporary interior settings. Engineered from rigid polyurethane with a dense 150-220 kg/m³ (production target ~160 kg/m³) structure, it mirrors the ornate carving of handcrafted timber or polished stone without adding structural burden to walls. Intended specifically for electric or vapor fire inserts up to 80°C (open flames strictly prohibited), it maintains dimensional perfection over time. Possessing a B2 fire safety class and a closed-cell moisture absorption rate of less than 1%, it completely resists warping, swelling, or rotting. Installation mandates a continuous application of polyurethane assembly adhesive on all back-contact edges and seams, reinforced with countersunk mechanical screws; silicone adhesives are strictly forbidden. Joints and screw heads must be filled with acrylic filler and sanded smooth using 180-220 grit sandpaper. Factory-finished with a white acrylic primer, it is ready for finishing with any water-based interior paint system.
Frequently Asked Questions
Can the Polure Classic Fireplace Mantel withstand open flame heat?
No, open flames are strictly prohibited. It is designed for electric or water vapor fireplaces operating up to 80°C.
What density material is used for the Polure Classic Fireplace Mantel?
It is crafted from high-density rigid polyurethane (150-220 kg/m³), combining wood-like impact strength with low mass.
How should the Polure Classic Fireplace Mantel be installed?
Apply continuous polyurethane assembly adhesive and secure with screws. Silicone is forbidden. Fill holes with putty and sand.
What paint finish is required for the Polure Classic Fireplace Mantel?
It comes pre-coated with a white acrylic primer. Apply two coats of standard water-based interior paint.