Wall Corner Moulding
Polure wall corner moulding provides architectural corner framing engineered to protect 90-degree outer wall junctions and frame interior paneling layouts. Molded from high-density rigid polyurethane (150-220 kg/m³), this corner moulding offers wood-like mechanical toughness while keeping structural wall weight minimal. Featuring a closed-cell physical matrix, its water absorption stays strictly below 1%, ensuring complete immunity to moisture, swelling, rot, and mold in humid rooms like bathrooms and kitchens. Fire-rated to class B2 and thermally stable between -100 °C / +80 °C, each length is supplied factory pre-coated in white acrylic primer. Installation requires clean surfaces, applying a continuous bead of polyurethane assembly adhesive on wall contact backs, and compulsory mechanical fixing with countersunk screws. Silicone adhesive is strictly forbidden. Joint lines and screw indentations are filled with acrylic filler, sanded smooth with 180-220 grit paper, and finished with interior water-based or synthetic topcoats.
Frequently Asked Questions
What material is Polure wall corner moulding made from?
It is manufactured from high-density rigid polyurethane (150-220 kg/m³), combining wood-like strength with lightweight wall mounting and B2 fire class.
Can wall corner moulding be installed in wet areas like bathrooms?
Yes. Water absorption is strictly under 1%, making it completely impervious to rot, swelling, or mold in humid rooms.
How is wall corner moulding installed?
Apply continuous PU assembly adhesive to contact backs and secure with countersunk screws. Silicone is forbidden. Fill screw holes with putty and sand smooth.
What paint finish is recommended for wall corner moulding?
Use interior water-based or synthetic paints for indoors, applied after light sanding with 180-220 grit paper.