Carved Leaf Ornament
Polure carved leaf ornaments bring classical botanical elegance and intricate relief carving to walls, doors, ceilings, and furniture pieces. Molded from high-density rigid polyurethane (150-220 kg/m³), these decorative appliques capture the fine detail of hand-carved wood while providing impact-resistant mechanical strength. Their closed-cell structure maintains water absorption below 1%, making them completely moisture-proof and resistant to swelling, rot, or mold in humid interiors. Rated B2 fire class, they withstand room temperatures from -100 °C / +80 °C without warping. Each piece features a factory-applied white acrylic primer ready for immediate topcoat painting. Installation requires a continuous bead of polyurethane assembly adhesive on rear surfaces and joint lines, reinforced with mechanical screw fixings.
Frequently Asked Questions
What material is the Polure carved leaf ornament made from?
The Polure carved leaf ornament is manufactured from high-density rigid polyurethane (150-220 kg/m³), delivering wood-like durability and B2 fire class safety.
Can carved leaf ornaments be used in humid areas such as bathrooms?
Yes. With water absorption under 1%, polyurethane leaf ornaments will not swell, warp, or harbor mold in moist conditions.
What adhesive should be used for installing a carved leaf ornament?
Continuous polyurethane assembly adhesive must be applied along back contact faces with mechanical screw fasteners. Silicone adhesive is forbidden.
How do you prepare a carved leaf ornament prior to painting?
Lightly sand the factory white acrylic primer with 180-220 grit sandpaper, then apply two coats of water-based or synthetic paint.