Baroque Corbel Model
Polure baroque corbel models add sophisticated architectural character to interior wall framing, shelf supports, and decorative pediments. Manufactured from high-density rigid polyurethane (150-220 kg/m³), each corbel delivers wood-like structural strength and intricate relief carving without adding heavy loads to wall surfaces. Featuring a closed-cell polymer structure with water absorption under 1%, this decorative bracket will not rot, swell, or deteriorate in humid indoor spaces or covered exterior areas. Thermally stable from -100 °C / +80 °C and rated Class B2 for fire safety, it comes pre-treated with a factory white acrylic primer. Installation requires cleaning the surface, applying a continuous bead of polyurethane assembly adhesive—never silicone—and securing the bracket with countersunk mechanical screws. Screw holes and seam joints are filled with acrylic spackle, lightly sanded with 180-220 grit sandpaper, and finished with two coats of water-based or synthetic paint.
Frequently Asked Questions
What density material is used for the Baroque Corbel Model?
The Baroque Corbel Model is manufactured from high-density rigid polyurethane (150-220 kg/m³), ensuring wood-like strength and sharp detail.
Can the Baroque Corbel Model be installed in damp environments?
Yes, with less than 1% water absorption and a closed-cell structure, the Baroque Corbel Model will not rot, warp, or mold in high-humidity areas.
What adhesive should be used for installing the Baroque Corbel Model?
Always use polyurethane assembly adhesive combined with mechanical screws. Standard silicone adhesive is strictly forbidden.
How should the Baroque Corbel Model be prepared for painting?
Lightly sand the factory acrylic primer with 180-220 grit sandpaper, then apply two coats of water-based, synthetic, or cellulosic paint.