Baroque Ceiling Ornament
Polure baroque ceiling ornaments bring elaborate classical detail and sculpted depth to residential and commercial ceilings. Manufactured from rigid high-density polyurethane with a structural density of 150-220 kg/m³ (production target ~160 kg/m³), each ornamental piece matches the fine detail of traditional plasterwork while remaining lightweight and resistant to impact. Its closed-cell polymer composition ensures water absorption stays below 1%, making it completely immune to swelling, rot, or mold in humid interiors or covered exterior ceiling areas. Capable of enduring temperatures from -100 °C / +80 °C without warping, the ornament also complies with Class B2 flame-retardant standards. Factory coated with a durable white acrylic primer, it is ready for custom painting. Installation involves applying continuous polyurethane assembly adhesive to contact faces alongside countersunk screw mechanical anchors, filling fastener holes with acrylic putty, sanding with 180-220 grit paper, and applying finish paint.
Frequently Asked Questions
What material density is used for Polure baroque ceiling ornaments?
Polure baroque ceiling ornaments are crafted from high-density rigid polyurethane (150-220 kg/m³), offering wood-like durability and crisp carved detail.
Can baroque ceiling ornaments be installed in moisture-prone rooms?
Yes, with water absorption below 1%, the closed-cell polyurethane will not rot, warp, or support mold in humid environments like bathrooms.
How are baroque ceiling ornaments properly installed?
Clean the surface, apply continuous polyurethane assembly adhesive, secure with mechanical screws, fill screw heads with acrylic putty, sand with 180-220 grit, and topcoat.
Is silicone adhesive suitable for mounting baroque ceiling ornaments?
No, silicone adhesive is forbidden due to inadequate bond strength. Always use polyurethane assembly adhesive combined with mechanical screws.
What painting guidelines apply to polyurethane baroque ceiling ornaments?
Lightly sand with 180-220 grit paper before painting over the factory white acrylic primer, then apply two coats of water-based or synthetic paint.