Architectural Wall Reliefs
Polure architectural wall reliefs bring classic three-dimensional elegance and refined artistic detail to interior walls and exterior building facades. Manufactured from high-density rigid polyurethane (150-220 kg/m³), these wall relief panels exhibit wood-like structural strength and impact resistance without placing unnecessary structural load on your walls. Featuring a closed-cell physical matrix with water absorption under 1%, they resist humidity, moisture, mold, and rot in both indoor living spaces and harsh outdoor weather conditions. Pre-primed at the factory with a high-grade white acrylic primer, each piece is ready for immediate topcoat painting. Installation requires preparing a clean, level substrate, applying a continuous bead of polyurethane assembly adhesive across all rear contact edges, and securing the panel with countersunk mechanical screws. Fill fastener recesses with facade filler, sand smooth with 180-220 grit sandpaper, and complete with your choice of water-based or exterior paint.
Frequently Asked Questions
What material is used for Polure architectural wall reliefs?
Polure architectural wall reliefs are manufactured from high-density rigid polyurethane (150-220 kg/m³), offering wood-like durability and B2 fire rating.
Can architectural wall reliefs be installed on exterior facades?
Yes, with water absorption below 1% and resistance from -100 °C / +80 °C, they perform exceptionally outdoors when finished with UV-resistant paint.
How are architectural wall reliefs installed?
Apply continuous PU assembly adhesive on contact edges, secure with mechanical screws, fill screw holes with filler, sand, and paint.
Is silicone recommended for mounting wall reliefs?
No, silicone is strictly forbidden as it lacks long-term structural bonding. Always use polyurethane assembly adhesive together with mechanical screws.