Architectural Wall Mouldings
Polure architectural wall mouldings bring refined linear framing, classic dado rail details, and crisp shadow lines to sophisticated residential and commercial interiors. Manufactured from high-density rigid polyurethane (150-220 kg/m³), these mouldings provide wood-like impact strength while remaining lightweight to prevent wall stress. Featuring closed-cell composition with less than 1% water absorption, they will not warp, swell, rot, or attract mold in humid settings like bathrooms or kitchens. Formulated to perform in temperatures from -100 °C / +80 °C with B2 fire safety rating, each piece is factory-coated with a white acrylic technical primer. Installation requires precise 45° miter cuts, continuous polyurethane assembly adhesive along wall contact edges, and countersunk screws. Fill joints and screw heads with acrylic putty, sand with 180-220 grit, and finish with quality topcoat paint.
Frequently Asked Questions
What material is used in Polure architectural wall mouldings?
Polure architectural wall mouldings are manufactured from high-density rigid polyurethane (150-220 kg/m³), offering timber-like strength and B2 fire rating.
Are architectural wall mouldings resistant to moisture and humidity?
Yes, with water absorption under 1%, they will not rot, swell, warp, or cultivate mold in damp rooms.
How are architectural wall mouldings installed securely?
They require continuous polyurethane assembly adhesive on rear surfaces combined with countersunk screws. Silicone is forbidden.
Can architectural wall mouldings be painted immediately?
Yes, after light sanding (180-220 grit) over the factory white primer, apply water-based or synthetic paints.