Carved Frame Corners
Polure carved frame corners showcase deeply sculpted ornate corner joints engineered for traditional wainscoting frames and decorative wall paneling. Molded from high-density rigid polyurethane (150-220 kg/m³), these carved accents deliver wood-equivalent mechanical toughness while keeping wall load minimal. Featuring a closed-cell physical matrix, its water absorption stays strictly below 1%, ensuring complete immunity to moisture, swelling, rot, and mold in humid rooms like bathrooms and kitchens. Fire-rated to class B2 and thermally stable between -100 °C / +80 °C, each piece is supplied factory pre-coated in white acrylic primer. Installation requires clean surfaces, applying a continuous bead of polyurethane assembly adhesive on wall contact backs, and compulsory mechanical fixing with countersunk screws. Silicone adhesive is strictly forbidden. Joint lines and screw indentations are filled with acrylic filler, sanded smooth with 180-220 grit paper, and finished with interior water-based or synthetic topcoats.
Frequently Asked Questions
What material is Polure carved frame corners made from?
They are manufactured from high-density rigid polyurethane (150-220 kg/m³), combining wood-like strength with lightweight handling and B2 fire class.
Can carved frame corners be installed in wet areas like bathrooms?
Yes. Water absorption is strictly under 1%, making them completely impervious to rot, swelling, or mold in humid rooms.
How are carved frame corners installed?
Apply continuous PU assembly adhesive to contact backs and secure with countersunk screws. Silicone is forbidden. Fill screw holes with putty and sand smooth.
What paint finish is recommended for carved frame corners?
Use interior water-based or synthetic paints for indoors, applied after light sanding with 180-220 grit paper.