Architectural Ceiling Relief
Polure architectural ceiling reliefs introduce refined classical depth and rich sculpted motifs to high-end interiors. Crafted from rigid high-density polyurethane (150-220 kg/m³), these ornamental relief panels offer the mechanical toughness of hard timber while remaining lightweight and stress-free for ceiling structures. The closed-cell polymer architecture ensures water absorption stays below 1%, making it completely resistant to swelling, rot, or mold in humid living areas or sheltered outdoor porticos. Capable of withstanding temperatures from -100 °C / +80 °C without dimensional distortion, the relief satisfies Class B2 fire-retardant requirements. Factory coated with a durable white acrylic primer, it provides an ideal foundation for topcoating. Installation requires clean ceiling preparation, applying continuous beads of polyurethane assembly adhesive, anchoring with mechanical screws, filling fastener countersinks with acrylic spackle, sanding with 180-220 grit paper, and painting with two coats.
Frequently Asked Questions
What density material is used for Polure architectural ceiling reliefs?
Polure architectural ceiling reliefs are produced from high-density rigid polyurethane (150-220 kg/m³), providing wood-like strength and sharp carved detail.
Can architectural ceiling reliefs be installed in humid locations?
Yes, with water absorption under 1%, closed-cell polyurethane will not rot, swell, or mold in humid rooms or covered patios.
How is an architectural ceiling relief installed properly?
Clean the surface, apply continuous polyurethane assembly adhesive, fix with mechanical screws, fill countersunk holes with acrylic putty, sand with 180-220 grit, and topcoat.
Why is silicone adhesive forbidden when fitting an architectural ceiling relief?
Silicone adhesive lacks structural bonding power. Mounting must be performed using dedicated polyurethane assembly adhesive along with mechanical screws.
What paint system should be used on an architectural ceiling relief?
Lightly sand the factory white acrylic primer with 180-220 grit paper before painting, then apply two coats of water-based or synthetic paint.