Decorative Column Bases
Polure decorative column bases provide ornate foundation plinths tailored to support interior and exterior classical column shafts. Molded from high-density rigid polyurethane (150-220 kg/m³), these hollow bases deliver wood-like mechanical durability and crisp carved detail while eliminating structural load weight on subfloors. Featuring a closed-cell polymer structure with water absorption under 1%, they offer complete moisture resistance and mold protection in damp interior spaces or entrance porticos. Operating reliably across temperatures from -100 °C / +80 °C with Class B2 fire safety certification, each base comes factory pre-coated with white acrylic primer. Note that Polure decorative column bases are strictly decorative non-load-bearing components; structural column loads must be supported by an internal steel profile. Never pour concrete inside. Installation requires applying continuous polyurethane assembly adhesive on contact joints (silicone is strictly forbidden) and securing with countersunk mechanical screws. Fill screw holes with putty, sand smooth with 180-220 grit paper, and apply two coats of paint.
Frequently Asked Questions
Are Polure Decorative Column Bases load-bearing?
No, Polure Decorative Column Bases are strictly decorative and NON-LOAD-BEARING. Structural loads must be supported by an internal steel profile.
Can concrete be poured inside Decorative Column Bases?
NEVER pour concrete inside Decorative Column Bases as it will damage and distort the polyurethane shell.
What density material is used in Polure Decorative Column Bases?
Polure Decorative Column Bases are molded from high-density rigid polyurethane (150-220 kg/m³), offering wood-like strength.
What adhesive should be used for installing Decorative Column Bases?
Always use polyurethane assembly adhesive combined with mechanical screws. Silicone is strictly forbidden.