Pillar Head
Polure pillar head forms a clean architectural capital crowning round or square decorative pillars in lobbies, portals, and verandas. Molded from high-density rigid poliuretano (150-220 kg/m³), this pillar head delivers wood-like impact strength while remaining lightweight to simplify installation. Its closed-cell internal matrix ensures water absorption remains under 1%, rendering it completely immune to moisture decay, rot, mold, and insect damage. Operable across temperatures from -100 °C / +80 °C, the product holds a B2 fire safety class for self-extinguishing safety. Supplied with a factory white acrylic technical primer, installation relies on continuous PU assembly adhesive on joining faces combined with mechanical countersunk screws. Fill screw holes with putty, sand smooth using 180-220 grit paper, and apply premium topcoat paint.
Domande Frequenti
What material makes up Polure pillar head?
It is manufactured from high-density rigid poliuretano (150-220 kg/m³), delivering high strength, sharp detail, and light weight.
Is Polure pillar head load-bearing?
No, it is a decorative hollow capital. Structural loads must be carried by an internal steel post. Concrete must never be poured inside.
How is Polure pillar head installed?
Apply continuous poliuretano assembly adhesive to contact joints and fasten with mechanical countersunk screws. Silicone adhesive is forbidden.
Can Polure pillar head be used outdoors?
Yes. Closed-cell poliuretano features water absorption under 1% and operates between -100 °C / +80 °C without rotting or warping.
What paint should be applied to Polure pillar head?
Pre-primed with white acrylic technical primer. Sand lightly with 180-220 grit paper and finish with water-based, synthetic, or outdoor UV paint.