Decorative Pillar Capitals
Polure decorative pillar capitals offer classic architectural finishing for interior pillars, grand foyers, and outdoor verandas. Fabricated from high-density rigid poliuretano (150-220 kg/m³), these capitals combine wood-like physical durability with a lightweight design that simplifies installation. Closed-cell material matrix keeps water absorption under 1%, rendering the capitals resistant to mold, rot, humidity, and insect damage. Operable across temperatures ranging from -100 °C / +80 °C, they carry a B2 fire safety classification for self-extinguishing protection. Factory pre-primed with white acrylic technical primer, mounting requires continuous PU assembly adhesive on joining surfaces along with mechanical countersunk screws. Fill seam lines and screw recesses with acrylic putty, sand with 180-220 grit paper, and coat with topcoat paint.
Domande Frequenti
What material is used for Polure decorative pillar capitals?
They are molded from high-density rigid poliuretano (150-220 kg/m³), delivering high impact strength and light weight.
How are Polure decorative pillar capitals installed?
Use continuous poliuretano assembly adhesive on contact edges combined with mechanical countersunk screws. Silicone is strictly forbidden.
Can decorative pillar capitals be installed outdoors?
Yes, water absorption is under 1% and thermal stability ranges from -100 °C / +80 °C, making them completely weatherproof.
What paint preparation is required for decorative pillar capitals?
Pre-primed with white acrylic technical primer at the factory. Sand lightly with 180-220 grit paper before applying topcoat paint.
Are Polure decorative pillar capitals load-bearing?
No, they are decorative non-load-bearing elements. Structural loads must be carried by an internal steel column.