Classical Capital Relief
Polure classical capital relief incorporates deeply sculpted relief carving into wall pilaster tops and facade embellishments. Molded from high-density rigid poliuretano (150-220 kg/m³), this relief feature possesses wood-like physical durability while being lightweight for effortless mounting. Closed-cell matrix design ensures water absorption stays below 1%, protecting against dampness, rot, mold, and insect damage in both indoor and outdoor applications. Thermally stable across -100 °C / +80 °C, it meets B2 fire safety criteria for self-extinguishing flame resistance. Arriving pre-coated with factory white acrylic technical primer, installation entails continuous PU assembly adhesive on contact joints plus mechanical countersunk screws. Fill joint lines with acrylic putty, sand smooth with 180-220 grit paper, and finish with quality topcoat paint.
Domande Frequenti
What material is Polure classical capital relief made of?
It is molded from high-density rigid poliuretano (150-220 kg/m³), providing sharp detail, wood-like strength, and lightweight handling.
How is Polure classical capital relief installed?
Apply continuous poliuretano assembly adhesive to contact faces and secure with mechanical countersunk screws. Silicone adhesive is forbidden.
Can Polure classical capital relief be used on outdoor walls?
Yes. With water absorption under 1% and thermal stability between -100 °C / +80 °C, it withstands rain and sun without degrading.
What painting steps are needed for classical capital relief?
Pre-primed in white acrylic at the factory. Sand lightly with 180-220 grit paper and apply topcoat paint.
Is Polure classical capital relief load-bearing?
No, it is a decorative wall ornament. Structural loads must be carried by independent framing.